C-TYPE – Loudspeaker II

2 Way Loudspeaker – ported cabinet, based on state-of-the-art transducers feature wealth of advanced technologies, materials and sophisticated design. Implanted into a mechanically insulated 15mm aluminum base, designed for maximum linearity in an inclined cabinet with antiparallel walls free of distortion and resonance.
The crossover topology and premium parts provides accurate mathematical reconstruction of the signal, whichtogether with cabinet slope insures perfect time aligned Loudspeaker. Linearity and low distortion combined with incredibly wide frequency range, make this Loudspeaker an uncompromising choice.
Coupled midwoofer units, additionally increase the speaker power which makes it compatible for larger room.

Constructed with no compromise – inclined cabinet with antiparallel walls, in proportions precisely constructed for ideal internal propagation of critical frequencies. Solid matrix construction made of patented material ORNAMAX™ coupled with laminate HDF make strong three-layer walls which completely cancel all cabinet resonances.

Front panel made of 15mm thick CNC machined hard alloy aluminum mechanically isolates the transducers from the cabinet and with its shape further linearizes the amplitude response, raising the overall performance to the highest level.

SCAN-SPEAK 154cm2 MIDWOOFER with latest generation SD-System patent SD-3, based on ultra linear Under-Hung Neodymium motor system. This allows the speaker to play multiple tones simultaneously without distortion, especially intermodulation distortion. Carefully designed and combined with a unique cone structure, the transparency, detail and lack of distortion even at higher levels is hard to find elsewhere.

SCAN-SPEAK 5.6cm2 RING-DOME TWEETER with SD-2 AirCirc 6 Neodymium motor system. The linearity and extremely low distortion of this speaker are indisputable. In addition to that response at higher frequencies is better controlled and this type of tweeter shows much more consistent behavior from 10 kHz to 20 kHz compare to all other concepts.

Both handmade – the result is an undisputed clarity in sound. “In the end it all comes down to one thing – a loudspeaker should not have a sound of its own and should faithfully reproduce the signal flowing through the voice coil without adding or removing anything.” – Scan Speak

Main concept is based on the exact mathematical reconstruction of the spectrum determined by the two transducers. Perfectly time aligned in their service area, the speakers receive a signal from high-performance filters, Superior Nitrogen capacitors and AIRCORE coils.

With the Superior Z-Cap even the finest nuances can be heard. AIrCORE coils made from massive copper round-wire specially developed for High-End loudspeakers, which focus on achieving an utmost natural, detailed and acoustically balanced music performance.

The crossover PCB is mounted directly on the terminal on which WBT nextgen™ pole terminal reside in Bi-Wire configuration through and through and therefore provide faithful signal transfer for authentic sound experience./p>

Not forgetting the details special attention is paid to wiring, with cables that consist of 4x 4mm² conductors. Two conductors with silvered OFC copper strands provide a deep and crystal-clear high frequency rendition. Simultaneously, two conductors with tinned OFC copper strands ensure precise, dynamic and powerful bass. All frequencies are represented and reproduced in a linear fashion true to the original.

Given the nature of all speakers as electro-mechanical transducers with very low efficiency, removing unwanted distortions that turn into vibrations and mechanical separation of the speaker from the room is essential for clear sound transmission.

Cabinet is double insulated from the underlying surface – massive hard alloy aluminum substrate made of two separate layers where on top and between are placed VIABLUE™ rubber vibration dampeners, and bottom VIABLUE™ spikes where vibrations are bundled and discharged through four points. This type of construction provides a vivid, clean and detailed sound.

ACOUSTICAL DATA

Cross point 2.150Hz
Linearity (+/-3dB) 39Hz – 25.000Hz
Frequency response (-6dB) 31Hz – 35.000Hz
Sensitivity (2.83V/1m) 90dB

ELECTRICAL DATA

Power handling (Long-Term IEC 18.2) 300W
Recommended amplifier power 100 – 300W RMS
Impedance 4Ω (3.7Ω minimum, 16Ω maximum)

MECHANICAL DATA

Loudspeaker dimensions (H x W x D) 1115 x 300 x 490 mm
Cabinet dimensions (H x W x D) 1055 x 252 x 425 mm
Loudspeaker Weight 60kg/each
Package dimensions 1220 x 400 x 600 mm
package weight 70kg/each

Specifications are subject to change due to imrovment, with highiest possible performance in mind.
Proudly designed, developed and handcrafted at Teoharov Audio Lab in Skopje, North Macedonia.

TECHNICAL DATA

INQUIRY

C-TYPE – Loudspeaker II

2 Way Loudspeaker – ported cabinet, based on state-of-the-art transducers feature wealth of advanced technologies, materials and sophisticated design. Implanted into a mechanically insulated 15mm aluminum base, designed for maximum linearity in an inclined cabinet with antiparallel walls free of distortion and resonance.
The crossover topology and premium parts provides accurate mathematical reconstruction of the signal, whichtogether with cabinet slope insures perfect time aligned Loudspeaker. Linearity and low distortion combined with incredibly wide frequency range, make this Loudspeaker an uncompromising choice.
Coupled midwoofer units, additionally increase the speaker power which makes it compatible for larger room.

Constructed with no compromise – inclined cabinet with antiparallel walls, in proportions precisely constructed for ideal internal propagation of critical frequencies. Solid matrix construction made of patented material ORNAMAX™ coupled with laminate HDF make strong three-layer walls which completely cancel all cabinet resonances.

Front panel made of 15mm thick CNC machined hard alloy aluminum mechanically isolates the transducers from the cabinet and with its shape further linearizes the amplitude response, raising the overall performance to the highest level.

SCAN-SPEAK 154cm2 MIDWOOFER with latest generation SD-System patent SD-3, based on ultra linear Under-Hung Neodymium motor system. This allows the speaker to play multiple tones simultaneously without distortion, especially intermodulation distortion. Carefully designed and combined with a unique cone structure, the transparency, detail and lack of distortion even at higher levels is hard to find elsewhere.

SCAN-SPEAK 5.6cm2 RING-DOME TWEETER with SD-2 AirCirc 6 Neodymium motor system. The linearity and extremely low distortion of this speaker are indisputable. In addition to that response at higher frequencies is better controlled and this type of tweeter shows much more consistent behavior from 10 kHz to 20 kHz compare to all other concepts.

Both handmade – the result is an undisputed clarity in sound. “In the end it all comes down to one thing – a loudspeaker should not have a sound of its own and should faithfully reproduce the signal flowing through the voice coil without adding or removing anything.” – Scan Speak

Main concept is based on the exact mathematical reconstruction of the spectrum determined by the two transducers. Perfectly time aligned in their service area, the speakers receive a signal from high-performance filters, Superior Nitrogen capacitors and AIRCORE coils.

With the Superior Z-Cap even the finest nuances can be heard. AIrCORE coils made from massive copper round-wire specially developed for High-End loudspeakers, which focus on achieving an utmost natural, detailed and acoustically balanced music performance.

The crossover PCB is mounted directly on the terminal on which WBT nextgen™ pole terminal reside in Bi-Wire configuration through and through and therefore provide faithful signal transfer for authentic sound experience.

Not forgetting the details special attention is paid to wiring, with cables that consist of 4x 4mm² conductors. Two conductors with silvered OFC copper strands provide a deep and crystal-clear high frequency rendition. Simultaneously, two conductors with tinned OFC copper strands ensure precise, dynamic and powerful bass. All frequencies are represented and reproduced in a linear fashion true to the original.

Given the nature of all speakers as electro-mechanical transducers with very low efficiency, removing unwanted distortions that turn into vibrations and mechanical separation of the speaker from the room is essential for clear sound transmission.

Cabinet is double insulated from the underlying surface – massive hard alloy aluminum substrate made of two separate layers where on top and between are placed VIABLUE™ rubber vibration dampeners, and bottom VIABLUE™ spikes where vibrations are bundled and discharged through four points. This type of construction provides a vivid, clean and detailed sound.

ACOUSTICAL DATA

Cross point 2.150Hz
Linearity (+/-3dB) 39Hz – 25.000Hz
Frequency response (-6dB) 31Hz – 35.000Hz
Sensitivity (2.83V/1m) 90dB

ELECTRICAL DATA

Power handling (Long-Term IEC 18.2) 300W
Recommended amplifier power 100 – 300W RMS
Impedance 4Ω (3.7Ω minimum, 16Ω maximum)

MECHANICAL DATA

Loudspeaker dimensions (H x W x D) 1115 x 300 x 490 mm
Cabinet dimensions (H x W x D) 375 x 220 x 320 mm
Loudspeaker Weight 60kg/each
Package dimensions 1220 x 400 x 600 mm
Package weight 70kg/each

Specifications are subject to change due to imrovment, with highiest possible performance in mind.
Proudly designed, developed and handcrafted at Teoharov Audio Lab in Skopje, North Macedonia.

TECHNICAL DATA

INQUIRY